Customizing the equalization pattern
Audible sound frequencies vary according to the individual. This function creates the appropriate equalization pattern according to your hearing preferences. This function is called “My Sound”.
■When a disc/file is stopped
1 Hold down [MY SOUND].TV screen
2 Press [ENTER/SET].•5 test tones are emitted individually from the speakers.
TV screen
Signal level
3 As soon as you hear the test tone, press [ENTER/SET].•The measurements are stored.
•An appropriate equalization pattern is cre- ated and shown on the TV screen.
4 Press or repeatedly to selectthe preset number from 1 to 3.•The equalization pattern is stored. The preset number, which is assigned to the equalization pattern, turns green on the TV screen.
TV screen
•To measure again, press or repeatedly to select “EXIT” on the TV screen, and then press [ENTER/SET]. You can store up to 3 equalization patterns.
5 Press [ENTER/SET].NOTE
•You can cancel the setting by pressing [MY SOUND].
Selecting the preset equalization pattern
Press [MY SOUND].•Each time you press [MY SOUND], the preset equalization pattern changes.
•To deactivate the stored equalization pattern, select “OFF”.
NOTE
• This function does not work for some files.
Emphasizing both treble and bass
You can boost both high and low frequencies of the sound. This function is called “Sound Turbo II”.
Press [S.TURBO II].•Each time you press [S.TURBO II], the setting turns on and off.
NOTE
•While the Sound Turbo II function is activated, the HBS function is automatically activated.
Emphasizing the bass
When the Sound Turbo II function is deactivated, you can boost only the low frequency. This function is called “HBS (hyper bass sound)”.
Press [HBS] while holding down [SHIFT].•Each time you press [HBS], the setting turns on and off.
NOTE
•Activating the Sound Turbo II function activates the HBS function. At this time, however, the “HBS” indicator does not light up.
Basic operations
12