For the locations of the remote control buttons, refer to page 37.

Entering a title

The operation is explained with the example of entering “F”.

1 Press [DISPLAY/CHARA] repeatedly to select the character type setting.

•Each time you press [DISPLAY/CHARA], the selected character type setting changes to “ABCDE” or “01234” on the TV screen.

•“ABCDE” refers to uppercase letters or sym- bols.

•“01234” refers to numbers.

•You can also confirm the character type set- ting in the display window. “A” or “1” is dis- played instead of “ABCDE” or “01234”.

2 Press the number button [3] repeatedly until “F” appears.

•Several characters are assigned to one but- ton. Press the button repeatedly until the desired character is displayed. In this exam- ple, “D”, “E” and “F” are assigned to [3].

•For the available characters, refer to “Avail- able characters” shown on the right.

3 Press [ENTER/SET].

NOTE

•When you want to move the character entry position, press  or  repeatedly.

•You can enter up to 24 characters for the track title and up to 28 characters for the group title.

•When you want to erase a character, move the character entry position to the desired character, and press [CANCEL].

•When you want to enter a space, select the space from the symbol (Refer to “Available char- acters” shown on the right). You can also enter a space at the end of a title by pressing .

•When you want to cancel title entry, press 7. The entered characters are not stored.

•If “PROHIBIT” appears in the display window, the connected USB device is prohibited from editing the track/group.

•If “DUPLICAT” appears in the display window, the same title has been recorded.

•If “NO NAME” appears in the display window, no name is entered when adding a title to a track/ group.

Available characters

You can use the characters shown below by repeatedly pressing the number buttons ([1] to [9] and [0]). Each number button is assigned with several characters.

Remote

control Uppercase Numbers

button letters

Symbols*

*Available symbols

You can use the symbols show below by repeatedly pressing [1].

Space

Recording sound directly from a CD to a USB device

40