• The “REC” indicator starts flashing.
NOTE
•When you want to quit recording, press 7.
•When “READING” is displayed in the display window, you cannot start recording.
•If “NODEVICE” appears in the display window, no USB device is connected or the connected USB device is not compatible with this system.
•If “D.FAIL” appears in the display window, this system has failed to read the USB device.
•If “W.PRT” appears in the display window, the connected USB device is write protected.
•If “FULLFILL” or “D.FULL” appears in the display window, the recordable capacity of the USB device is full.
-You may be trying to record more than the lim- ited number of recordable tracks. You can record up to 999 tracks to a USB device.
-The number of tracks that can be recorded to the root group may be limited on the USB device. The number of tracks may have exceeded the limitation. In this case, select another group or create a new group.
•If “SCMS VLT” appears in the display window, you are trying to record sound from a
•Changes to the volume during recording do not affect the recorded sound or the recorded sound level.
•The sound adjustment functions of this system do not affect the recorded sound.
•Operating this function automatically cancels random and repeat playback.
CAUTION
•Do not bump or move the main unit while record- ing sound. Such movement may interfere with recording. Take care especially when “WAIT” appears in the display window.
•Do not disconnect the USB device during recording, as this may cause malfunction.
Recording only one track
•You can use the number buttons, 4or ¢to select a track.
•Finishing step 6 returns playback to the begin- ning of the current track and only that track is recorded.
Recording programmed tracks
•Refer to steps 1 and 2 on pages 25 and 26 for programming tracks.
•The following procedure is the same as steps 4 to 6 on page 37 to this page.
Recording sound directly from a CD to a USB device
38