JVC 0397MKV*UN*VP, LYT0002-0J9A manual Installing Jlip Player Software, Windows

INSTALLING (JLIP Player Software)45

WINDOWS® 95 WINDOWS® 3.1

Refer to the Windows® 95 manual or your computer’s manual for details on basic Windows® 95 operating procedures.

Installation Procedure

This software offers you the choise of viewing on-screen messages in English or French. Select the desired language during installa- tion by performing the following steps.

*To start the setup program...

1 Launch Windows® 95

•Close any other applications that are running.

2 Insert the "VIDEO MOVIE PLAYER" CD- ROM into the CD-ROM drive.

3 Choosetaskbar. "Run" from the "Start" on the

4 If you want English on-screen messages… If the "VIDEO MOVIE PLAYER" CD-ROM is in Drive D, type "D:\VMPE\SETUP" in the box to the right of "Name". If the disk is in Drive E, type "E:\VMPE\SETUP".

If you want French on-screen messages… If the "VIDEO MOVIE PLAYER" CD-ROM is in Drive D, type "D:\VMPF\SETUP" in the box to the right of "Name". If the disk is in Drive E, type "E:\VMPF\SETUP".

•Click "OK".

•Once the setup program is running, simply follow the instructions displayed on-screen.

•When setup is complete, the "MOVIE PLAYER" icon appears on the screen.

•"MOVIE PLAYER Setup was completed successfully." appears.

5 Click "OK" to complete installation.

Refer to the Windows® 3.1 manual of or your computer manual for details on basic Windows® 3.1 operating procedures.

Installation Procedure

This software offers you the choise of viewing on-screen messages in English or French. Select the desired language during installa- tion by performing the following steps.

*To start the setup program...

1 Launch Windows® 3.1

•Close any other applications that are running.

2 Insert the "VIDEO MOVIE PLAYER" CD- ROM into the CD-ROM drive.

3 Choose "Run" from "File" in the "Program Manager".

4 If you want English on-screen messages… If the "VIDEO MOVIE PLAYER" CD-ROM is in Drive D, type "D:\VMPE\SETUP" in the box to the right of "Name". If the disk is in Drive E, type "E:\VMPE\SETUP".

If you want French on-screen messages… If the "VIDEO MOVIE PLAYER" CD-ROM is in Drive D, type "D:\VMPF\SETUP" in the box to the right of "Name". If the disk is in Drive E, type "E:\VMPF\SETUP".

•Click "OK".

•Once the setup program is running, simply follow the instructions displayed on-screen.

•When setup is complete, the "MOVIE PLAYER" icon appears on the screen.

•"MOVIE PLAYER Setup was completed successfully." appears.

5 Click "OK" to complete installation.

NOTE : This instruction manual uses English on-screen messages in its explanation.