EN
13
Recording Mode Setting
Set depending on your preference.
LCD monitor
Recording Menu
4 | REC MODE |
| SP |
| WIDE MODE |
| OFF |
| ZOOM | 40X | |
| DIS | ON | |
| GAIN UP | AGC | |
TO DATE / TIME MENU
TO SYSTEM MENU
END
4REC MODE | SP |
|
WIDE MODE | OFF |
|
ZOOM | 40X | |
DIS | ON | |
GAIN UP | AGC | |
TO DATE / TIME MENU
TO SYSTEM MENU
END
Recording mode indicator
SP
Lock button
Power lamp
5S |
| |
M | OFF Y |
|
A | P | |
|
| |
|
| AL |
Power dial
MENU button
Select Dial
SP
LP
SELECT OPERATION MODE | ||
1 Set the Power Dial to “ | M | ” while pressing down |
the lock button located on the dial.
2 OPEN LCD MONITOR Open the LCD monitor fully.
The power lamp comes on and the camcorder is turned on.
•The LCD monitor turns on/off automatically when it is opened/closed at approx. 90 degrees while the Power Dial is set to any operation mode (except “OFF”).
•The LCD monitor can be tilted upward up to 180 degrees and downward up to 90 degrees.
3 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.
4 SET RECORDING MODE
First move the pointer and highlight bar to “REC MODE” by rotating the Select Dial. Press the Select Dial and the parameter “SP” or “LP” is highlighted. Select “SP” or “LP” by rotating the Select Dial. Press the Select Dial twice to exit from the Recording Menu.
•“LP” (Long Play) is more economical, providing 1.5 times the recording time.
•Audio Dubbing is impossible on a tape recorded in the LP mode.
NOTES:
●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.
●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.
