JVC LYT0190-001B manual Attach Camcorder to AC Charger Station, Supply Power

1 CONFIRM POWER-OFF STATUS Make sure all the units are turned off.

2 ATTACH CAMCORDER TO AC CHARGER STATION

Attach the camcorder to the AC Charger Station referring to step 2 as shown in the illustration on pg. 55.

3 CONNECT CAMCORDER TO PRINTER OR VIDEO UNIT EQUIPPED WITH DV INPUT CONNECTOR

Pull out the connector cover and open it. Make connections to the device you want to connect to using the DV cable, as shown in the illustration.

4 CONNECT PRINTER TO PC Connect the printer cable to the printer’s PARALLEL connector and the PC’s PARALLEL (PRINTER) connector.

EN59

5 SUPPLY POWER

Plug the AC Charger Station’s power cord into an AC outlet.

TURN ON POWER
6 Turn the camcorder’s Power Dial to “PLAY”,
“	A	” or “	M	” while pressing down the lock

button located on the dial and turn on the other units.

NOTES:

●You cannot use the battery pack installed in the camcorder as the power supply since a digital signal is output from the DV OUT connector only when using the AC Charger Station.

●When using the camcorder for dubbing, be sure to use it as a player. The camcorder's DV connector is only for output.

●Also refer to the instruction manuals of the

connected units.