EN
81
Warning Indications
INDICATIONS | FUNCTION |
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted 
As the battery power comes close to nil, the battery indicator 
blinks. When the battery power is exhausted, power turns off automatically.
|
|
|
|
| Appears when no tape is loaded, or when the erase | (☞ pg. 12) | |
|
|
|
|
| |||
|
|
|
|
| protection tab is set to “SAVE”. | ||
|
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
| Appears if dirt is detected on the heads during recording. (☞ pg. 83) | ||
|
|
|
|
|
| ||
|
|
|
|
| Appears if condensation occurs. When this indication is displayed, | ||
|
|
|
|
| |||
|
|
|
|
| the camcorder turns off automatically. |
| |
|
|
|
|
|
|
| |
TAPE! | Appears for 10 seconds after power is turned on if there's no tape | ||||||
loaded. |
| ||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
TAPE END | Appears when the tape ends during recording | (☞ pg. 22) | |||||
or playback. | |||||||
|
|
|
|
| |||
|
|
|
|
|
|
| |
SET DATE/TIME! | ● Appears when the date/time is not set. | (☞ pg. 11) | |||||
● Appears when the | (☞ pg. 11) | ||||||
|
|
|
|
| discharged and the previously set date/time is erased. | ||
|
|
|
|
|
|
| |
ERROR! | Appears when Audio Dubbing is unavailable. | (☞ pg. 68) | |||||
REFER MANUAL |
|
| |||||
|
|
|
|
|
| ||
|
|
|
|
| The error indications (E01 — E06) show what type of malfunction has | ||
|
|
|
|
| occured. When an error indication appears, the camcorder turns off | ||
E01 — E06 | automatically. Press the reset button after removing the power supply | ||||||
|
|
|
|
| (battery, etc.), and wait a few minutes for the indication to clear. | ||
|
|
|
|
| When it does, you can resume using the camcorder. If the indication | ||
|
|
|
|
| remains, consult your nearest JVC dealer. | (☞ pg. 74) | |
