76
EN
CONTROLS,
INDICATIONS
AND
CONNECTORS
Camcorder
1
2
Connector cover
Pull this out to open.
3
! 4
@
#
5
6 |
7 |
8 |
9 |
0 |
1Lens hood
Turn this counterclockwise to release.
2Lens cover
Opens when the viewfinder is pulled out or the LCD monitor is opened fully with the Power Dial set to any position except “PLAY” or “OFF”.
3Remote sensor (☞ pg. 50)
Receives the signal from the remote control. When using the remote control, point it at the remote sensor.
4Tally lamp
Lights during recording.
5Stereo microphone
For use when recording.
6SNAPSHOT button (☞ pg. 28)
Press when taking a snapshot.
7
8Rewind button (2) (☞ pg. 48)
Rewinds the tape.
9Play/Pause button (6/4) (☞ pg. 48)
Plays back or stops the tape temporarily.
0Stop button (5) (☞ pg. 48)
Stops playback of the tape.
!External stereo microphone input connector (MIC) (☞ pg. 68)
If an optional microphone is connected, the
@Video/audio output connector or head- phones connector 
/AV-OUT)
(☞ pg. 54)
The provided VIDEO/AUDIO cable (ø3.5) can be connected to a television etc. Using optional headphones, you can listen to the sound. However, headphones equipped with volume control cannot be used.
#DV OUT connector (i.Link*) (☞ pg. 58, 61)
Connect a video unit equipped with a DV connector.
*i.Link refers to the
specification and extensions thereof. The 
logo is used for products compliant with the i.Link standard.
$LCD monitor (☞ pg. 22)
The image appears during recording or play- back.
%Reset button (☞ pg. 74)
When a malfunction occurs, press this button after removing the power supply (battery etc.). Pressing this button also resets the date/time or various settings.
