To Perform High-Speed Search . . .
.... press 2 or 3after pressing 6/4. The tape
will move at approximately 9 times the normal playback speed. Watch in the viewfinder and, when you reach the spot you want to see, press 6/4and normal playback resumes.
.... during playback, press and hold 2or 3. The
search continues as long as you hold the button. Once you release it, normal playback resumes.
.... a slight mosaic effect appears on screen during
Still Playback
To temporarily stop playback, press 6/4. Press again to resume playback. If still playback contin- ues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the stop mode, the camcorder’s power is automatically turned off.
EN
47
Slow-Motion Playback
●To perform
●To change from normal to
●During
●After the Slow Rewind or Slow Forward button is pressed, the still image may be displayed for a few seconds, then the screen may become blue back for a few seconds. This is not a malfunction.
●There may be a small margin between the slow- motion playback start point you chose and the start point at which the camcorder actually begins playback in slow motion.
●During
NOTES:
●The sound is not available during
●Copy guarded tapes cannot be played back. The screen becomes blue back.
