8
EN
GETTING
STARTED
Charging The Battery Pack
The battery pack has not been charged at the factory. Before using it, be sure to charge it with the AC Charger Station.
ATTACH | DETACH |
Battery pack
To AC outlet
Power cord
Power cord
AC Charger Station
| Charger indicator |
DC OUT jack | Power lamp |
SUPPLY POWER TO CHARGER | |
1 Plug the AC Charger Station’s power cord in to | |
an AC outlet. The power lamp comes on. | |
ATTACH BATTERY |
|
2 Attach while making sure the | marks are |
facing down and aligned with the correspond- ing marks on the AC Charger Station.
•The Charger Indicator begins blinking to indicate charging has started.
3 CONFIRM STATUS
When the charger indicator stops blinking but stays lit, charging is finished.
4 DETACH BATTERY
Slide the battery in the direction of the arrow and lift off.
•Remember to unplug the AC Charger Station’s power cord from an AC outlet.
Battery | Approximate charging time | |
|
| |
90 min. | ||
|
| |
180 min. | ||
(optional) | ||
| ||
|
|
NOTES:
●If you connect the camcorder’s DC cord to the AC Charger Station during battery charging, power is
supplied to the camcorder and charging stops (☞ pg. 10).
●When using the AC Charger Station, be sure to use the supplied power cord only.
●When charging the Battery Pack for the first time or after a long storage period, the Charger Indicator may not light. In this case, remove the Battery Pack from the AC Charger Station, then try charging again.
●Since the AC Charger Station processes electricity internally, it becomes warm during use. Be sure to use it only in
●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.
Please purchase a new one.
INFORMATION:
The AC Charger Station (provided) enables you to charge not only one battery pack but also one battery pack installed in the camcorder (☞ pg. 53).
