EN
13
Recording Mode Setting
Set depending on your preference.
Lock button
Power lamp
5S |
| |
M | OFF Y |
|
A | P | |
|
| |
| AL | |
Power dial
Select Dial | MENU button |
|
| Recording mode indicator |
|
| SP | SP |
|
| LP |
| Display | ||
| Recording Menu | ||
|
|
|
|
4 |
|
| SP |
REC MODE | |||
| WIDE MODE |
| OFF |
| ZOOM | 40X | |
| DIS | ON | |
| GAIN UP | AGC | |
TO DATE / TIME MENU
TO SYSTEM MENU
END
4REC MODE | SP |
|
WIDE MODE | OFF |
|
ZOOM | 40X | |
DIS | ON | |
GAIN UP | AGC | |
TO DATE / TIME MENU
TO SYSTEM MENU
END
1 SELECT OPERATION MODE
Set the Power Dial to “ M ” while pressing down the lock button located on the dial.
2 PULL OUT VIEWFINDER Pull out the viewfinder fully.
The power lamp comes on and the camcorder is turned on.
3 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.
4 SET RECORDING MODE
First move the pointer and highlight bar to “REC MODE” by rotating the Select Dial. Press the Select Dial and the parameter “SP” or “LP” is highlighted. Select “SP” or “LP” by rotating the Select Dial. Press the Select Dial twice to exit from the Recording Menu.
•“LP” (Long Play) is more economical, providing 1.5 times the recording time.
•Audio Dubbing is impossible on a tape recorded in the LP mode.
NOTES:
●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.
●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.
