52
EN
PLAYBACK
Basic
Connections
VCR/TV Connection (when connecting directly to the camcorder)
Please refer to your VCR and/or TV instruction manual(s) when connecting.
Connector is under the cover.
To AV OUT | VIDEO/AUDIO cable | |
connector | ||
(provided) | ||
|
Cable adapter (provided) If your TV or VCR has the
connector (SCART), useTV the provided cable adapter.
To AUDIO IN connector (L/R)
White to AUDIO L | To |
| TV or VCR |
Red to AUDIO R |
|
|
| VCR | |
Yellow to VIDEO | |||
| |||
To VIDEO IN
connector VIDEO OUT select switch (Set to CVBS)
1 CONFIRM
2 CONNECT CAMCORDER TO TV OR VCR Pull out the connector cover and open it. Connect as shown in the illustration above.
If Using A VCR . . . go to step 3.
If not . . . go to step 4.
3 CONNECT VCR OUTPUT TO TV INPUT Refer to your VCR’s instruction manual.
4 TURN ON POWER
Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial and turn on the TV/VCR.
5 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate for video playback.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time, Time Code
.... set to “ON” or “OFF” in the Playback Menu
(☞ pg. 50).
• Playback Sound Mode Display
.... set the Power Dial to “ | M | ”, press the MENU |
|
|
button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.
NOTES:
●It is recommended to use the AC Charger Station
as the power supply instead of the battery pack. (☞ pg. 10)
●Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT connector.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●To keep the camcorder's display from appearing on the TV screen during playback, press the IND. ON/OFF button for longer than 1 second.
