JVC LYT0193-001B specifications Camcorder

74EN

CONTROLS,INDICATIONSANDCONNECTORS

Camcorder

	1
	2
	3
Connector cover	4
Pull this out to open.	5
	6
	#
	$
	%

7

8 9 0! @

1Stereo microphone

For use when recording.

2Lens hood

Turn this counterclockwise to release.

3Lens cover

Opens when the viewfinder is pulled out with the Power Dial set to any position except “PLAY” or “OFF”.

4Tally lamp

Lights during recording.

5Remote sensor (☞ pg. 48)

Receives the signal from the remote control. When using the remote control, point it at the remote sensor.

6Camera sensor

Be careful not to cover this area; built-in here is the sensor necessary for shooting.

7SNAPSHOT button (☞ pg. 26)

Press when taking a snapshot.

8Stop button (5) (☞ pg. 46)

Stops playback of the tape.

9Play/Pause button (6/4) (☞ pg. 46)

Plays back or stops the tape temporarily.

0Rewind button (2) (☞ pg. 46)

Rewinds the tape.

!Fast-Forward button (3) (☞ pg. 46)

Fast-Forwards the tape.

@Reset button (☞ pg. 72)

When a malfunction occurs, press this button after removing the power supply (battery etc.). Pressing this button also resets the date/time or various settings.

#External stereo microphone input connector (MIC) (☞ pg. 66)

If an optional microphone is connected, the built-in microphone is disabled.

$Video/audio output connector or head- phones connector (/AV-OUT)

(☞ pg. 52)

The provided VIDEO/AUDIO cable (ø3.5) can be connected to a television etc. Using optional headphones, you can listen to the sound. However, headphones equipped with volume control cannot be used.

%DV OUT connector (i.Link*) (☞ pg. 56, 59)

Connect a video unit equipped with a DV connector.

*i.Link refers to the IEEE 1394-1995 industry

specification and extensions thereof. The logo is used for products compliant with the i.Link standared.