4 ENGAGE STILL MODE
Once you find the spot at which you want to start recording, press 6/4 twice to engage the Still mode.
Pull out the viewfinder fully.
2
3 START SEARCH
Press 6/4, then press 2 or 3. Watch in the viewfinder for the spot where you want to begin recording.
PULL OUT VIEWFINDER
Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial.
•The power lamp comes on.
1
Stop button Play/Pause button
Rewind button
SELECT OPERATION MODE
20
EN
RECORDING
Recording From The Middle Of A Tape
Basic
Recording
(Cont.)
When removing a tape on which you were recording, or when you resume recording on a tape after playing back the recording previously made (without taking the tape out between recordings), perform this proce- dure.
Power Dial
A OFF Y A L
P
M
5S
Power lamp
Lock button
5S
M A
OFF
YALP
START/STOP button
5 START RECORDING
Turn the Power Dial to any operation mode except “PLAY” and “OFF”, then press START/ STOP.
•Start recording from a point prior to the end of the last recording. A few seconds of the end of the last recording will be erased.
NOTE:
Even if you start recording from the end of the previous recording leaving no blank space, there may be situations where a clean transition is not possible.
