EN
31
System Menu
The System Menu allows you to set the following functions: Photo Mode, Scene, Beep/Tally, Wind Cut, Sound Mode, ID numbers and Demonstration Mode (☞ pg. 32).
Lock button
5S |
| |
M | OFF Y |
|
A | P | |
|
| |
| AL | |
Power Dial
Select Dial
MENU button
Display
REC MODE | SP |
WIDE MODE | OFF |
ZOOM | 40X |
DIS | ON |
GAIN UP | AGC |
TO DATE / TIME MENU
4TO SYSTEM MENU
END
Recording Menu
PHOTO MODE | FRAME |
SCENE | 5S |
BEEP / TALLY | ON |
WIND CUT | OFF |
SOUND MODE | 32kHz |
ID NUMBER | 06 |
DEMO. MODE | OFF |
4RETURN
System Menu
1 SELECT OPERATION MODE
First turn the Power Dial to “ M ” while pressing down the lock button located on the dial, make sure the viewfinder is pulled out.
2 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.
3 ACCESS SYSTEM MENU
Move the pointer and highlight bar to “TO SYSTEM MENU” by rotating the Select Dial, then press it. The System Menu appears.
4 SELECT FUNCTION
Move the pointer and highlight bar to the desired function by rotating the Select Dial, then press it. The pointer stops blinking, indicating that the function has been selected.
5 SET FUNCTION PARAMETERS Rotate the Select Dial to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press it, and the pointer and highlight bar automatically move to “RETURN”.
•To set the parameters for a different function, repeat steps 4 and 5.
6 CLOSE SYSTEM MENU
Press the Select Dial twice. Setting is complete and the System Menu disappears.
