Toshiba tecra m2 3.16 Wireless LAN Test (Cisco)

3 Tests and Diagnostics 3.16 Wireless LAN Test (Cisco)
3.16 Wireless LAN Test (Cisco)
This section describes how to perform the wireless LAN transmitting-receiving test with the
test program.
NOTE: Use another computer that can communicate by the wireless LAN as a reference
machine to perform this test.
To start the Wireless LAN test program, follow the steps below:
Insert a floppy disk containing the test program into the target machine (machine to be tested)
and turn on the target machine. The Wireless LAN test menu will appear after the program
starts.
Press 1, 2 or 3 key to perform the corresponding sub test. To exit the Wireless LAN test
program, eject the floppy disk and turn the target machine off while the menu above is
displayed.
3-36 TECRA M2 Maintenance Manual (960-468)