Toshiba tecra m2 4.24 LCD unit/FL inverter

4 Replacement Procedures 4.24 LCD unit/FL inverter
4.24 LCD unit/FL inverter
Removing the LCD unit/FL inverter
To remove the LCD unit/FL inverter, follow the steps below and refer to figures 4-48 to 4-53.
1. Remove the two mask seals and the following screws securing the LCD mask.
• M2.5×6B FLAT HEAD screw ×2
Mask seal
M2.5×6B FLAT HEAD Mask seal
M2.5×6B FLAT HEAD
Figure 4-48 Removing the mask seals and screws
4-68 TECRA M2 Maintenance Manual (960-468)