Toshiba tecra m2 3.1 The Diagnostic Test

3.1 The Diagnostic Test 3 Tests and Diagnostics
3
3.1 The Diagnostic Test
This chapter explains how to use the Diagnostic Test program to test the functions of the
computer’s hardware modules. The Diagnostic Test Program is stored on the Diagnostic Disk
NOTE: To start the diagnostics, follow these steps:
1. Check all cables for loose connections.
2. Exit any application you may be using and close Windows.
The Diagnostic Test program consists of the following two functions:
 Repair Main (T&D)
 Repair initial config set
The Repair Main (T&D) consists of the following eight functions:
 DIAGNOSTIC TEST
 HEAD CLEANING
 LOG UTILITIES
 RUNNING TEST
 FDD UTILITIES
 SYSTEM CONFIGURATION
 EXIT TO MS-DOS
 SETUP
The DIAGNOSTIC TEST MENU contains the following twelve functional tests:
 SYSTEM TEST
 MEMORY TEST
 KEYBOARD TEST
 DISPLAY TEST
 FLOPPY DISK TEST
 PRINTER TEST
 ASYNC TEST
 HARD DISK TEST
 REAL TIMER TEST
 NDP TEST
 EXPANSION TEST
 CD-ROM/DVD-ROM TEST
TECRA M2 Maintenance Manual (960-468) 3-1