Toshiba tecra m2 - page 286

4 Replacement Procedures 4.24 LCD unit/FL inverter
8. Carefully lift up the top of the LCD unit to access the LCD cable.
NOTE: When lifting up the top of the LCD unit, hold the corners of the LCD unit. The
top edge of LCD unit is sensitive area.
9. Remove the copper tape securing the LCD cable.
10. Disconnect the LCD cable and remove the LCD unit.
CAUTION: When removing the LCD cable, be careful not to damage the connector.
Copper tape
LCD cable
LCD unit
Figure 4-52 Removing the LCD unit (2)
4-72 TECRA M2 Maintenance Manual (960-468)