Toshiba tecra m2 - page 311

4.27 Fluorescent Lamp 4 Replacement Procedure
Assembling the 14.1-inch XGA Samsung Fluorescent Lamp
To assemble the 14.1-inch XGA Samsung fluorescent lamp, follow the steps below and refer
to figures 4-60 to 4-70.
1. Set the fluorescent lamp on the flame in place.
2. Connect the grounding wire of the fluorescent lamp to the frame.
3. Fix the back cover of the fluorescent lamp with the two screws.
4. Install the backlight assembly.
5. Install the two clips.
6. Install the panel assembly to the backlight assembly.
7. Secure the top chassis with the four screws.
8. Secure the PCB with the two screws.
9. Stick the lamp-wire tape and aluminum tape.
10. Stick the PCB cover and COF cover.
TECRA M2 Maintenance Manual (960-468) 4-97