4.16 Sound board 4 Replacement Procedures
4.16 Sound board Removing the Sound board
To remove the sound board, follow the steps below and refer to figure 4-31 and 4-32.
1. Disconnect the sound board flexible cable from the connector PJ9510 on the sound
board and the connector PJ9500 on the system board.
2. Peel off the glass tape and disconnect the sound board cable from the connector
PJ9511 on the sound board and the connector PJ9501 on the system board.
3. Remove the sound board by lifting it up.
PJ9510
PJ9511
Glass ta
p
e
Sound board cable
Sound board flexible cable
PJ9501 PJ9500
Figure 4-31 Removing the sound board
TECRA M2 Maintenance Manual (960-468) 4-49