Toshiba tecra m2 - page 259

4.15 Display assembly 4 Replacement Procedures
2. Turn the computer face up and open the display.
3. Remove the following screw and the LCD cable holder.
• M2.5×6B FLAT HEAD screw ×1
4. Disconnect the LCD cable from the connector PJ5500 on the system board.
5. Disconnect the power switch cable from the connector PJ9600 on the system board.
6. Disconnect the RGB cable from the connector PJ5621 on the system board.
7. Disconnect the speaker cable from the connector PJ3202 on the sound board.
8. Disconnect the microphone cable from the connector PJ6001 on the sound board.
9. Peel the insulator securing the wireless LAN cable.
M2.5
×
6B FLAT HEAD
RGB cable
LCD cable
LCD cable holder
Micro
p
hone cable
S
p
eaker cable
Power switch cable
Insulator
Figure 4-28 Removing the display assembly (2)
TECRA M2 Maintenance Manual (960-468) 4-45