Toshiba tecra m2 - page 116

3 Tests and Diagnostics 3.1 The Diagnostic Test
Other tests are as follows:
 Wireless LAN (Cisco) Test
 Wireless LAN (Atheros) Test
 Wireless LAN (Calexico) Test
 Sound/Modem/LAN Test
 IEEE1394 Test
 Bluetooth Test
 Thermal Radiation Control Test
You will need the following equipment to perform some of the Diagnostic test programs.
 The Diagnostics Disk (all tests)
 A formatted working disk for the floppy disk drive test
 An external USB FDD
 A cleaning kit to clean the floppy disk drive heads (Head Cleaning)
 A PC card wraparound connector (Expansion test) (Rev.B or higher)
 A printer wraparound connector for the printer wraparound test (Printer test)
 A CD test media (TOSHIBA CD-ROM TEST DISK ZA1217P01/P000204190)
(CD-ROM/DVD-ROM test)
 A DVD test media (Toshiba-EMI DVD-ROM TEST DISK TSD-1) (CD-ROM/DVD-
ROM test)
 A CD-RW media that supports four-speed writing (media manufactured by RICOH
or Mitsubishi Chemical are recommended.)
 A Music CD (CD-ROM/DVD-ROM test)
 An External RGB monitor (Display test)
 A Serial port wraparound connector (ASYNC test)
 A RS-232C cable (ASYNC test)
 A Headphone (Sound test)
 A microphone
 A modular cable and RJ11 connector checker
 A modular cable and RJ11 connector checker (LED)
 USB test module and USB cable
 LAN wraparound connector
 An access point and a cross cable (Wireless LAN (Calexico) test)
The following sections detail the tests within the Diagnostic Test function of the
DIAGNOSTIC TEST MENU. Refer to Sections 3.24 through 3.29 for detailed information
on the remaining Service Program Module functions.
3-2 TECRA M2 Maintenance Manual (960-468)