Toshiba tecra m2 4.26 Hinge

4 Replacement Procedures 4.26 Hinge
4.26 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to figures 4-56 to 4-59.
1. Remove the following screw and the LCD cable holder.
• M2.5×4B FLAT HEAD screw ×1
M2.5×4B FLAT HEAD
LCD cable holder
Figure 4-56 Removing the LCD cable holder
4-82 TECRA M2 Maintenance Manual (960-468)