Toshiba tecra m2 4.4 SD card

4.4 SD card 4 Replacement Procedures
4.4 SD card
Removing the SD card
To remove the SD card, follow the steps below and refer to figure 4-3.
CAUTION: Before you remove the SD card, refer to the card's documentation and to
your operating system documentation for proper procedures and
precautions.
1. Turn the computer face up.
2. Push the SD card in (indicated as “1” in the figure below) and release it to pop the
card out slightly.
3. Grasp the SD card and pull it out (indicated as “2” in the figure below).
SD card
2 1
Figure 4-3 Removing the SD card
Installing the SD card
To install the SD card, follow the steps below and refer to figure 4-3.
1. Insert the SD card.
2. Push it carefully to ensure a firm connection.
TECRA M2 Maintenance Manual (960-468) 4-11