4 Replacement Procedures 4.22 Speaker
4.22 Speaker Removing the Speaker
To remove the speaker, follow the steps below and refer to figures 4-44.
1. Remove the following screw and the speaker holder (left).
• M2.5×6B FLAT HEAD screw ×1
2. Remove the speaker (left) from the slot.
3. Remove the following screw and the speaker holder (right).
• M2.5×6B FLAT HEAD screw ×1
4. Remove the speaker (right) from the slot.
M2.5
×
6B FLAT HEAD
Speaker holder
Speaker
Speaker
M2.5
×
6B FLAT HEAD
Speaker holder
Figure 4-44 Removing the speakers
5. Peel off the two acetate tapes securing the speaker cable.
6. Remove the speaker cable from the slot.
4-64 TECRA M2 Maintenance Manual (960-468)