
Take Apart | Hard Drive, Ultra2 LVD SCSI - 70 | |
| 2. Disconnect the SCSI hard |
|
| drive power cable (P5). | |
| Caution: Pull the SCSI | |
| power cable straight out | |
| of the connector on the | |
| drive. Any up or down | |
| motion to the connector | |
| could damage the drive. | |
| Replacement Note: The | |
| power cables attach to | |
| drives as follows: | |
| P5 attaches to bay 1 | |
| P2 attaches to bay 2 | |
| P3 attaches to bay 3 | |
| 3. Disconnect the Ultra2 | |
| LVD SCSI data cable from | |
| the hard drive. |