|
| Troubleshooting |
|
| Symptom Charts/ Startup - 42 |
|
|
|
|
| |
|
|
|
|
| |
System shuts down | 1 | Make sure the power cord is plugged in firmly. | |||
intermittently | 2 | Check that the power source is turned on and the correct | |||
|
|
|
| voltage is present. | |
|
|
| 3 | Replace the power cord. | |
|
|
| 4 | Make sure the air vents are clear. | |
|
|
| 5 | Check that the fan cable is connected and the fan is | |
|
|
|
| operational. | |
|
|
| 6 | Check that the heatsink is properly attached to the processor. | |
|
|
| 7 | Power Macintosh G4 (PCI Graphics): Reset the Cuda chip. See | |
|
|
|
| “Resetting the Cuda Chip” in this chapter. | |
|
|
| 8 | Reset the logic board: | |
|
|
|
| • | Power Mac G4 (AGP Graphics): Refer to “Resetting the |
|
|
|
|
| PMU on the Logic Board” in this chapter. |
|
|
|
| • | Power Macintosh G4 (PCI Graphics): Refer to “Resetting |
|
|
|
|
| the PCI Logic Board” in this chapter. |
|
|
| 9 | Replace the power supply. | |
|
|
| 10 | Replace the logic board. | |
