JVC LYT0329-001B manual EN67

EN67

SYMPTOM

12.Although Pro Snapshot is taken with the flash, Red-Eye Reduction does not take place.

13.The image taken using Pro Snapshot is too dark.

14.The image taken using Pro Snapshot is too bright.

15.The colour of Pro Snapshot looks strange.

16.Digital Zoom does not work.

17.Programme AE with special effects and Fade/Wipe Effects do not work.

18.The Black & White Fader does not work.

19.The Dissolve function does not work.

POSSIBLE CAUSES	CORRECTIVE ACTION
12. • The subject does not look	12. • The subject should look straight
straight toward the flash.	toward the flash, especially the
• The subject does not look at the	first flash. If the subject does not
first flash, which is an important	see the first flash, it will be
part of Red-Eye Reduction.	difficult for Red-Eye Reduction
• The camcorder is too far from	to take place (☞ pg. 26).
the subject.	• The flash is effective for
• The flash is not in Red-Eye	subjects at a distance of approx.
Reduction mode.	0.7 m to 2 m from the
	camcorder (☞ pg. 26).
	• Press the Red-Eye Reduction
	Button ( /3) to display the
	Red-Eye Reduction indicator
	(☞ pg. 26).
13. • “FLASH” is set to “OFF” in the	13. • Set “FLASH” to “AUTO” or
Recording Menu.	“ON” in the Recording Menu
• The flash emission window is	(☞ pg. 26).
covered by fingers, etc..	• Do not cover the flash emission
• The flash brightness is set to	window.
produce a darker image	• Adjust the flash brightness to a
(adjustment value: –3).	larger value (☞ pg. 27).
• The camcorder is too far from	• The flash is effective for
the subject.	subjects at a distance of approx.
	0.7 m to 2 m (☞ pg. 26).
14. • “FLASH” is set to “ON” in the	14. • Set “FLASH” to any parameter
Recording Menu.	other than “ON” in the
	Recording Menu (☞ pg. 26).
15. • The light source or the subject	15. • Set “FLASH” to “ON” in the
does not include white. Or there	Recording Menu. Or find a
are various different light	white subject and compose
sources behind the subject.	your shot so that it also appears
	in the frame (☞ pg. 26).
16. • 10X optical zoom is selected.	16. • Turn off the Video Echo mode
• The Video Echo mode is	(☞ pg. 35).
activated.	• Wait until the Picture Wipe or
• Picture Wipe or Dissolve are	Dissolve effects are completed
being used in a scene transition.	(☞ pg. 28).
• 5-Second recording was	• Change the setting of either the
done with the Power Switch	System Menu or the Power
set to “5S”, and with “5SD”	Switch (☞ pg. 21).
selected in the System Menu.	• Do not attempt to take a Pro
• Pro Snapshot was attempted	Snapshot when performing
during Digital Zoom.	Digital Zoom (☞ pg. 29).
• High Speed Recording is	• Release High Speed Recording
attempted.	(☞ pg. 42).
17. • The Power Switch is set to “ ”	17. • Set the Power Switch to “ ”or
or “5S” .	“	” (☞ pg. 13).
• Some functions are disabled	• ☞ pg. 42.
during High Speed Recording.
18. • The Sepia or Monotone mode is	18. • Turn off Sepia and Monotone
activated.	(☞ pg. 34).
19. • The Sepia, Monotone or Slow	19. • Turn off Sepia, Monotone or
Shutter mode of Programme AE	Slow Shutter before adding
with special effects is activated.	Dissolve to a scene transition
• The Squeeze mode is selected.	(☞ pg. 34).
• The previously selected mode of	• Make sure that the Squeeze
Programme AE with special	mode in the Recording Menu is
effects was changed after the	set to “OFF” (☞ pg. 29).
last selected scene for editing	• Make sure you have selected
was registered.	the mode of Programme AE with
	special effects you want before
	starting editing (☞ pg. 34).

CONTINUED ON NEXT PAGE