JVC Model HR-VP639U manual Unplug Vcrs Power, SET A/B Code Switch, Plug in Power Cord

52

A/B CODE

1 2 3

4 5 6

7 8 9

0

SPECIALFEATURES(cont.)

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC

POWERVCRs independently using the A/B CODE switch. You can set this VCR so it responds to remote commands only when the

switch is set to B, and another VCR so it responds to commands when the switch is set to A. The switch is preset to A because this VCR normally responds to A-code signals. You can easily modify this VCR to accept B-code commands.

		UNPLUG VCR'S POWER
TIMER		CORD
	1	Unplug from the AC outlet.
	2	SET A/B CODE SWITCH
		Set the A/B CODE switch on the remote control to B.
	3	PLUG IN POWER CORD
		Plug back in to the AC outlet.
	4	TURN VCR POWER ON
		Press POWER on the remote.

The VCR will now respond only to B-code commands.

Child Lock

This feature allows you to prevent the operation of the VCR.

TURN VCR POWER ON

1 Press POWER.

ENGAGE CHILD LOCK

2 Press and hold POWER on the remote control until the Child Lock indicator ("—") appears on the front display panel.

●To cancel Child Lock, press and hold POWER on the remote to turn the VCR on. During timer recording, pressing TIMER also cancels Child Lock.

NOTES:

●When Child Lock is engaged, make sure to keep the remote control out of the reach of children.

●Timer recording of programs that were previously set can be performed while the Child Lock is engaged. The feature remains in effect after the recording is finished.