CD CONTROL
\ 
DISC 1 | DISC 2 | DISC 3 |
or
or
or
On the Remote Control
Press CD CONTROL then press 3.
The source is set to CD and play starts from the first track of the currently selected CD whose disc number shown on the CD indicator.
•If the above operation is carried out while the power is on standby, the power is automatically turned on.
Press DISC (1 to 3) of the disc you want to play.
The source is set to CD and play starts from the first track of the selected CD.
COMPU PLAY
When DISC (1 to 3) on the Remote Control is pressed while the power is on standby, the power is automatically turned on.
To stop play the disc, press 7 STOP (or 7on the Remote Control). The display will show the total number of tracks and total playing time of the disc that was playing followed by the playing time of the first track.
To stop play and remove the disc, press 0 for the disc being played.
To pause, press CD £/8 (or 8on the Remote Control). The playing time will flash.
To cancel pause, press CD £/8 (or 3on the Remote Control) the Unit. Play continues from the point where it was paused.
Selecting a Track
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select the track.
The selected track starts playing.
Each time you press 4P. DOWN or ¢P. UP, the track changes by one. Press and hold 4P. DOWN or ¢P. UP to continuously change tracks.
DISC 1 | DISC 2 | DISC 3 | |
PRO LOGIC 3CH LOGIC | TEST TONE | ||
– | CENTER | + | CENTER MODE |
| LEVEL |
| |
– | REAR | + |
|
LEVEL | DELAY TIME | ||
L | BALANCE R |
| |
or
Locating a Track with the Remote Control Directly
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
1.Press the DISC (1 to 3) for the disc tray containing the track you want to listen to.
•Example: for the third disc, press DISC 3.
2.Enter the number of the track you want to listen to with the number keys.
The selected track starts playing.
•Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For track 32, press +10 three times, then 2.
Fast Forward / Reverse
Use 1 TUNING DOWN or TUNING UP Á on the MULTI CONTROL.
For Fast Forward, press and hold down ÁTUNING UP. For Reverse, press and hold down TUNING DOWN 1. Release the button when the part you wish to listen to is reached.
Changing Discs While Playing
You can replace a CD in a tray not being used, while another CD is playing.
1.Press 0 of the tray not being used.
The tray opens.
2.Replace the disc in the tray.
3.Press 0 to close the tray.
22
