JVC CA-MXGA3V, MX-GA3V To Load CDs, To Unload CDs, One Touch Play, English, Unit to open the tray

			Using the CD Player (Digital Audio CDs, MP3 Discs)
Example of indication:			❏ When you use an 8 cm CD, place it on the inner circle of the tray.
When CD door has ejected once and then			❏ You can load CDs while listening to the other source.
CD-1 is pressed. (DISC1 is selected)			❏ When power is turned off with the tray opened, the tray is auto-
Shows that this disc number is selected.
			matically closed.
1	2	3	❏ If the CD cannot be read correctly (because it is scratched, for
			example), “ 0 0:00” appears on the display.

English

Shows that the disc is rotating.

One Touch Play

The power comes on, and operations are done automatically.

❏By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it will start playing from the first track.

❏By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc number, it will start play from the first track.

To Load CDs

1 Press the CD Open/Close 0 button on the

Unit to open the tray.

2 Place a CD, with its label side up, onto the tray.

Be sure that the CD is securely seated on the disc tray.

With the label side up

To Unload CDs

Take out the CD as shown below.

1 While the CD Player is stopped, press the CD Open/Close 0 button on the Unit to open the tray.

2 Remove the CD, then press the DISC SKIP button on the Unit.

The tray turns for the next CD.

3 Repeat step 2 to remove all the CDs.

4 Press the CD Open/Close 0 button on the

Unit to close the tray.

❏You can remove CDs while listening to the other source.

•You can also remove the CDs during playback. However, in this case, you can only remove the CDs that are not be- ing played back.

STANDBY/ON

3 Press the DISC SKIP button on the Unit and place the next CD.

When you press the button, the tray turns for the next CD.

4 Repeat step 3 for the last CD.

5 Press the CD Open/Close 0 button on the

Unit.

The tray is closed.

•When placing a disc in the tray, be sure to position the disc inside the recess correctly. Otherwise, the message “No disc” will appear in the display, and the disc may be damaged or the Unit may be damaged when the tray is opened, or it may be difficult to remove the disc from the Unit.

12