JVC MX-GA3V Basics of Using the CD Player- Normal Play, To Play CDs, To Select a Track, Load CDs

Using the CD Player (Digital Audio CDs, MP3 Discs)

English

Basics of Using the CD Player- Normal Play

To Play CDs

1 Load CDs.

2 Press one of the Disc button (CD1-CD3) you want to play.

The selected disc number (e.g. “CD-1”) appears on the dis- play.

The first track of the selected CD begins playing. When the first CD finishes playing, the next and the third CDs are con- tinuously played back.

When the last CD has finished playing, the CD Player auto- matically stops.

Examples:

CD1 = CD2 = CD3 = (stop)

CD2 = CD3 = CD1 = (stop)

❏You can start to play the currently selected disc by simply press- ing the CD 6 button.

While playing the CD, the following will appear on the display.

1 2 3

Track number	Elapsed	CD is playing.
	playing time

•When the Disc button (CD1-CD3) is pressed with the tray

opened, the tray is closed and the selected CD automatically begins playing.

To stop playing the CD, press the 7 button. The following in- formation for the CD is displayed.

1 2 3

Total track number Total playing time

To pause, press the CD 6 button. The playing time indication blinks on the display.

To cancel pause, press the CD 6button again. Play continues from the point where it was paused.

To remove the CD, stop playing and press the CD Open/Close

0button on the Unit.

Tips:•Playing back the CD using the DISC SKIP button

You can also play the CDs using the DISC SKIP button. During playback, each time you press the button, the next CD is automat- ically played back. If the next disc tray is empty, the disc tray is automatically skipped.

•Removing/changing the CDs during playback

While playing back a CD (e.g. CD-1), you can remove or change the other CDs (e.g. CD-2 and CD-3) by pressing the CD Open/ Close 0 button. After removing or changing, press the same but- ton to close the tray.

To Select a Track

During playback (using the 4 or ¢ button):

Briefly press the 4 or ¢ button to select the track you want to play.

By pressing the button, you can skip to the next track or skip back to the previous track.

•The selected track starts playing.

•Press the ¢ button once to skip to the beginning of the next track. (You can skip to the next CD (e.g. CD-1 = CD-2 = CD-3).)

•Press the 4 button to skip to the beginning of the current track. Press twice quickly to skip to the beginning of the previ- ous track. (You cannot skip back to the previous CD.)

In Stop mode (using the 4 or ¢ button):

By briefly pressing the 4 or ¢ button, the CD Player operates in the same way as during playback, except the following points.

•The buttons are effective only for the currently selected CD.

Using the numeric keys on the Remote Control:

Using the numeric keys, you can directly select the track on the currently selected CD.

•The selected track starts playing.

For example, press +10, then 5 to play back the track number 15. See “Entering the Number with the Remote Control” on page 8.

Search Play

Holding down the following buttons, during playback, will fast forward/backwards the CD.

•22 or ¡ button on the Unit

•4 or ¢ button on the Remote Control

Programming the Playing Order of the Tracks

You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped.

❏You can program up to 32 tracks in any desired order including the same tracks.

To Make a Program

1 Load CDs

2 In Stop mode, set the CD Player in Program Play mode.

On the Unit

Press the PROGRAM button to light the “PRGM” indicator on the display.

At the same time, “PROGRAM” appears on the display.

On the Remote Control

Press the PROGRAM/RANDOM button until “PROGRAM” ap- pears on the display.

The “PRGM” indicator also lights up on the display.

Each time you press the button, the display changes as follows: PROGRAM = RANDOM = Blank display (Normal Play) = (back to the beginning)

•If a program is already made, the last step of the program will be displayed.

13