JVC LVT1091-001A Playing the Microphone Sound, through the Speakers, Microphone Mixing, English

Models: CA-MXGA3V SP-MXGA3V LVT1091-001A MX-GA3V

1 36
Download 36 pages 26.34 Kb
Page 33
Image 33
To Apply Digital Echo

 

Using the Microphone

To Apply Digital Echo

 

Playing the Microphone Sound

Press the ECHO button on the Remote Control.

The Echo indicator ( ) comes on.

through the Speakers

To cancel the ECHO, press the ECHO button again. The Echo

 

 

indicator goes off.

You can directly output the microphone sound from the speakers.

 

English

No echo is applied.

An echo is applied.

To prevent howling and squealing (feedback) when using the microphone, adjust the volume properly. Also, try to avoid to pointing the microphone towards the speaker.

To Record Your Singing

1 Follow the steps in “Singing Along with Karaoke” above.

2 Prepare a tape and source, then press the REC START/STOP button on the Unit.

For details, see “Standard Recording” on page 22.

Microphone Mixing

When using special Karaoke sources for Karaoke, use the follow- ing procedure.

1 Turn the MIC LEVEL control on the Unit to MIN.

2 Connect a microphone by plugging it into the MIC jack.

3 Start a source CD, tape, or other equipment.

4 Adjust the volume, as you sing into the microphone.

To adjust the volume, use the MIC LEVEL control and VOL- UME control on the Unit or the VOLUME +,- button on the Remote Control.

When you want to apply echo to the microphone, press ECHO button on the Remote Control. The Echo indicator (Playing the Microphone Sound ) will come on.

To Record Microphone Mixing

1 Follow the steps in “Singing Along with Karaoke” above.

2 Prepare a tape and source, then press the REC START/STOP button on the Unit.

For details, see “Standard Recording” on page 22.

1 Turn the MIC LEVEL control on the Unit to MIN.

2 Connect a microphone by plugging it into the MIC jack.

3 Adjust the volume, as you sing into the microphone.

To adjust the volume, use the MIC LEVEL control and VOL- UME control on the Unit or the VOLUME +,- button on the Remote control.

When you want to apply echo to the microphone, press ECHO button on the Remote Control. The Echo indicator (through the Speakers ) will come on.

Recording from the Microphone

1 Follow the steps in “Singing Along with Karaoke” above.

2 Prepare a tape and source, then press the REC START/STOP button on the Unit.

For details, see “Standard Recording” on page 22.

30

Page 33
Image 33
JVC LVT1091-001A Playing the Microphone Sound, through the Speakers, Microphone Mixing, To Apply Digital Echo, English