JVC MX-GB5C manual Basic CD Operations

One Disc play

When 2 or 3 CDs are loaded on the disc trays, you can select one particular disc to be played back.

On the unit ONLY:

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press REPEAT repeatedly so that the 1 DISC indicator lights up on the display.

1 DISC indicator

TRACK

WOOFER 1 DISC

•Each time you press the button, the indication on the display changes as follows:

ALL DISC 1 DISC REPEAT 1*

(initial setting)

REPEAT ALL DISC* REPEAT 1 DISC*

*See page 19.

3 Press one of the disc number buttons (CD1, CD2 or CD3) you want to listen.

Playback stops when all tracks of the selected disc are played once and resumes to All Disc play.

To stop during play, press 7.

•For MP3 disc, this unit can store the number of the track that you have stopped playback. By pressing CD 6, you can start playback again from the beginning of the same track—Resume play (see also page 17).

To remove the disc, press CD 0.

To exit from One Disc play, press REPEAT repeatedly so that ALL DISC indicator lights up on the display.

The following operations will also cancel the One Disc play and restore All Disc play when—

•Stopping playback,

•Turning off the power,

•Ejecting the carrousel, or

•Changing the source to play.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press DISC CHANGE to change the CD and the carrousel comes out.

If you change CDs during play, the current play will not stop until all CDs you have changed are played.

To close the carrousel, press DISC CHANGE or CD 0.

To skip to the another CD in the carrousel

Press DISC SKIP on the remote control.

To stop play for a moment

Press CD 6.

While pausing, “PAUSE” appears on the display. To resume play, press CD 6again.

To locate a particular point in a track

During play, press and hold ¡or

1.

• ¡: Fast forwards the disc.

•1: Fast reverses the disc.

When using the remote control, press and hold ¢/¡ or 4/1.

To go to another track

For Audio CD:

Press ¢or 4before or during playback.

• ¢: Skips to the beginning of the next or succeeding tracks.

•4: Goes back to the beginning of the current or previous tracks.

When using the remote control, press ¢/¡or 4/1.

If you press ¢or 4(or ¢/¡ or 4/1 on the remote control) to select a track while playback is stopped

The selected track starts playback.

15