JVC MX-GB5C manual Using the Timers

English

Using the Timers

There are three timers available—Daily Timer, Recording	2 Press CLOCK/TIMER again.
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the	“ON TIME” appears for 2 seconds, then
	the unit enters on-time setting mode.
unit. (See “Setting the Clock” on page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Daily Timer works every day unless you cancel it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using the tuner as the source to play:

—Make sure to preset a station you want to play. (See page 12.)

•When using a CD as the source to play:

—Make sure there is a CD you want to play on the currently selected disc number tray.

•When using a tape as the source to play:

—Make sure that a tape you want to play is in the deck A if there are tapes in both the deck A and B.

•When using the external component as the source to play:

—Set the timer equipped with the external component at the same time.

On the unit ONLY:

1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.

indicator lights up and the DAILY (daily timer) indicator starts flashing on the display.

WOOFER

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME REC

(Daily Timer)

Canceled CLOCK ON TIME

(See page 9.) (Recording Timer)

WOOFER

3 Set the on-time you want the unit to turn on.

1) Press ¢ or 4to set the hour, then press SET/DISPLAY.

2)Press ¢ or 4to set the minute, then press SET/DISPLAY.

“OFF TIME” appears for 2 seconds, then the unit enters off- time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1)Press ¢ or 4to set the hour, then press SET/DISPLAY.

2)Press ¢ or 4to set the minute, then press SET/DISPLAY.

The unit enters source selecting mode.

WOOFER

5 Press ¢or 4 to select the source to play, then press SET/DISPLAY.

•Each time you press ¢ or 4, the source changes as follows:

TUNER FM TUNER AM

AUX TAPE CD

TUNER FM : tunes in to a specified preset FM station.

=go to step 6.

TUNER AM : tunes in to a specified preset AM station.

	= go to step 6.
CD	: plays the current disc from the first track.
	= go to step 7.
TAPE	: plays a tape in deck A or B.
	= go to step 7.
AUX	: plays an external source.
	= go to step 7.

23