JVC MX-J333VU manual Playing Back Audio CDs

English

Playing Back Audio CDs

Placing CDs

1 Press 0 e for the disc tray (CD 1 to 3) you want to load a CD onto.

The unit automatically turns on and the disc tray comes out. The Powered Rolling Panel also opens automatically.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same 0 e you have pressed in step 1.

The disc tray closes, and the corresponding disc number indicator (CD 1 to CD 3) lights up on the display.

4 Repeat steps 1 to 3 to place other CDs.

When placing more than one CD continuously

When you press 0 e for the next tray you want to place another CD onto, the first disc tray automatically closes and then the next tray comes out.

NOTE: When placing another CD, wait until current CD playing or stop playing.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Playing Back the Entire Discs — Continuous Play

You can play CDs continuously.

1 Place CDs.

2 Press one of the disc number buttons			CD3
(CD 1, CD 2, and CD 3) r, 1 for the			CD2
disc you want to play.
CD play starts from the first track of the selected			CD1
disc.
1	2	3

A

Track number Elapsed playing time

•Pressing CD 6 y, ) instead of the disc number buttons starts playing back if a CD is in the trays.

To stop during play, press 7 z, _.

To remove the disc, press 0e for the corresponding disc tray.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

•When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)

•When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)

•When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can do the following operations.

Disc number 1 2 3

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator flashes while the corresponding CD is being played.

•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

To exchange CDs during playback of another

Press 0 e corresponding to a CD, not playing or selected currently, to eject and exchange the CD.

If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.

To stop play for a moment

Press CD 6 y, ).

While pausing, the elapsed playing time flashes on	C D
the display.

To resume play from pausing, press CD 6 y, )again.

9

Continued

EN6-16;MX-J333V/PM69

6/30/99, 2:26 PM