English
Connecting Auxiliary Equipment
You can connect an audio equipment – used only as a playback device.
When you connect and use this equipment, refer also to its manual.
Be sure that the plugs of the audio cords are
White plugs and jacks are for left audio signals, and red ones for right audio signals.
VCR or other equipment
You can connect the following equipment to this system.
•TV with a video input jack: used as a monitor of video CD playback.
•Audio/Video equipment.
To listen to this source, press AUX p, ~.
Auxiliary Equipment
• DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect audio equipment
TV
VIDEO
OUT
To video input 
STEREO RECEIVER |
MODEL NO. MX - J333V |
AC 110/127/220 |
/ 230 - 240V |
50/60Hz 85W |
AUX
RIGHT LEFT
To audio output
Audio/video equipment
Connect the audio output jacks on the other equipment and the AUX jacks on the rear, using an audio cord (not supplied).
When connecting Auxiliary Equipment
•Connect the VIDEO OUT jack at the back panel of the System to the video input jack on the TV via the supplied video cord.
•Connect the AUX jacks to the output of Audio/Video equipment.
•No audio signal is produced at the AUX IN jacks.
5 | Continued |
|
6/30/99, 2:22 PM
