NOTE

•When placing the surround speaker on a stand, such as a speaker stand, attach the foot seals to the surround speakers, depending on the way the

speakers are placed ( page 9).

•When mounting the surround speakers on the wall, pay attention to the following:

•Obtain screws that are strong enough to mount the speakers to the wall.

•If the screws used are not strong enough or the speakers are not properly mounted, the speak- ers may fall down, causing injury or damaging other equipment. If you are not sure about the strength of the wall or other things, make sure to consult with a specialist.

•Give careful consideration to the place to which the speakers are mounted. If the speakers are mounted in areas that get in the way in daily lives or in locations where they can easily bump into people, it may result in injury or damage to the equipment.

Information on Speaker Display inthe display window

Speaker Display shows input signals and the speaker in use.

Sub-Woofer

When the sub-woofer is set to "OFF" ( page 40), or when headphones are being used, the light is off.

The light is on when the left front speaker signal is being input.

The light is on when the center speaker signal is being input.

The light is on when the right front speaker signal is being input.

The light is on when LFE signal is being input.

The light is on when the left surround speaker signal is being input.

The light is on when the monophonic signal is being input.

The light is on when the right surround speaker signal is being input.

When the line under L, C, R, LS, or LR is on, the sound is being played from that speaker.

Setting the Speaker Position

Based on how the surround speakers are placed

( pages 8 and 9), set the speaker position.

■When the main unit is turned off

Press on the main unit.

Each time you press , the display toggles as follows.

:Select this when Pattern 1 is used.

:Select this when Pattern 2 is used.

:Select this when Pattern 3 is used.

NOTE

•When nothing appears in the display window, press

to select "DISPLAY ON"( page 21), and then set the speaker position.

How to remove the speaker cover

When performing maintenance or other procedures, you can remove the cover of the front speakers by pulling the cover towards you.

•You cannot remove the cover of the surround speakers.

10