Troubleshooting

Problem

Possible cause

Possible solution

Reference

page

 

 

 

 

 

 

 

No sound/video is

Improper connection.

Connect all cords properly.

15

produced.

Headphones are connected.

Disconnect the headphone plug.

11

 

 

 

 

The clock display is

A power failure occurred or the

Reset the clock.

19

flashing.

power plug was disconnected.

 

 

 

 

 

 

 

The disc is upside down.

Place the disc on the disc tray with

24

 

the letter-printed surface facing up.

Disc playback does not

 

 

 

Leave the main unit turned on, wait

 

start.

Moisture has condensed on the

3

 

lens.

for approximately 1 or 2 hours, and

 

then operate the main unit.

 

 

 

 

 

 

 

 

A certain point cannot be

The disc is scratched or dirty.

Clean or replace the disc.

72

played back properly.

An error occurred on the MD.

Record to the MD again.

51

 

 

 

 

You cannot record an

The MD is write-protected.

Cancel the write-protection.

72

MD.

 

 

 

 

 

 

 

A radio broadcast cannot

No antenna is connected.

Connect an antenna.

14

be received.

 

 

 

 

 

 

 

A whirring noise is

The main unit is located close to a

Place the main unit away from a TV,

 

TV, computer, or other electric

3

produced.

computer, or other electric appliance.

appliance.

 

 

 

 

 

 

 

 

You cannot set the timer.

You did not set the clock.

Set the clock.

19

 

 

 

 

The timer does not work.

The main unit is turned on.

After setting the timer, turn off the

66, 68

main unit.

 

 

 

 

 

 

 

You cannot operate the

The remote control batteries are

Replace the batteries with new

12

remote control.

running low.

batteries.

 

 

 

 

 

You cannot operate the

 

 

 

main unit with the number

The remote control mode selector

Set the remote control mode selector

19

buttons on the remote

on the remote control is set to TV.

to AUDIO.

 

control.

 

 

 

 

 

 

 

The sound is not

The sub-woofer setting (SUB

Turn on the sub-woofer setting (SUB

 

produced from the sub-

40

WFR) is "OFF".

WFR).

woofer.

 

 

 

 

 

 

 

 

●If this product does not function properly even after you have implemented the possible solutions given above

Many functions of this product are implemented by microcomputers. If malfunction is caused by thunder or static electricity, or the main unit does not function properly even when you press a button, disconnect the power plug from the AC outlet, wait for a while, and then connect this product again. Then reset the clock.

74