(Continued) Setting Up the Unit
■Pattern 2
Left speaker | JVC logo is placed | Right speaker |
outside. |
Surround | Center unit | Surround | |
speaker | speaker | ||
| |||
| |||
DV3S) |
| DV3S) |
TV stand (not supplied)
Listening Point
•Place the surround speakers close to the front speaker.
•With this setting, select "F2" in "Setting the
Speaker Position" ( page 10).
Attaching the Foot Seals to the Surround Speakers to Prevent Them from Slipping
1 As shown in thediagram, detach the foot seals (supplied) from the backing.2 Attach four foot seals to the bottom of each surround speaker.• When placing the | • When placing the |
unit vertically | unit horizontally |
Label |
|
■Pattern 3
Left speaker | JVC logo is placed | Right speaker |
outside. |
Center unit
TV stand (not supplied)
Listening Point
Surround speakers
•Place the surround speakers slightly behind the listening point.
In this case, change the surround speaker cord to the 10 meter long one (supplied).
| White |
| White |
| switch |
| |
|
| switch | |
|
|
| |
(+) | Bronze | Silver wire | |
|
| wire - | - connect it |
|
| connect it | to negative |
Black line | to positive | side | |
side (+). |
| ||
|
|
| |
Pull out the wire while | Hold down the white | ||
holding down the white | switch on the plug and | ||
switch on the plug. | connect the 10 meter | ||
|
| long cord. | |
• With this setting, select "R" in "Setting the | |||
Speaker Position" ( | page 10). |
|
•While the speaker position is set to "R", the speaker setting icon is added to the initial setting
screen ( page 42).
9