Quick Setup

Getting Started

 

 

Connecting the TV and Receiver

Use the supplied system cable to connect the TV to the receiver. The two connectors are of different shapes. Ensure that the pins on connector 1 are oriented correctly, press the connector into the socket, and tighten the screws at left and right to lock it in place. Press connector 2 firmly into place until it is locked.

1

2

 

Disconnecting the system cable

Release connector 1 by unscrewing the screws at left and right and removing it from the socket. Release connector 2 by removing it from the socket while pressing the release bottoms on either side.

12

Connecting the power cord to the AC outlet

Insert the AC plugs on the power cords from the TV and receiver into AC outlets.

Caution

Operate only from the power source specified (AC 120V, 60 Hz) on the unit.

Failure to use the supplied power cord or to insert it into a correctly grounded outlet may result in electric shocks.

Back of the TV

AC INLET

Power cord

AC INLET

SUB WOOFER

 

OUT

 

 

AUDIO L VIDEO

 

 

MONITOR / REC OUT S-VIDEO

 

Power cord

Back of the receiver

Use the supplied power cord which best suits the area in which you live.

Insert the AC plug into a correctly grounded outlet.

• Remove the AC plug from the outlet to completely disconnect the TV from the power supply.

Receiver rear

14

Page 14
Image 14
JVC PD-42X795 Connecting the TV and Receiver, Disconnecting the system cable, Connecting the power cord to the AC outlet