![](/images/new-backgrounds/1127160/12716045x1.webp)
Quick Setup | Connections |
|
|
Connecting to the Surround Amplifier
In
A center speaker in a movie theater is set in back of the screen so it can recreate a conversation scene in the movie more naturally. By using your TV's speaker as the center speaker, you can obtain the same sound effect as in a movie theater in you home theater sound system.
Front | Front | Surround |
Receiver Rear Panel
75Ω |
|
|
(VHF/UHF) |
| CENTER |
|
| CHANNEL |
R | L | INPUT |
DVI |
|
|
ANALOG |
|
|
AUDIO |
|
|
IN |
|
|
Pr | Pb | Y |
INPUT2 |
|
|
R AUDIO | L | VIDEO |
CENTER CHANNEL OUTPUT
(VARIABLE OUTPUT)
1)Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround amplifier's CENTER CHANNEL OUTPUT terminal.
Note:
• Please read the benefit of this feature on page 57.
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or Dolby Digital.
Receiver Rear Panel | Amplifier |
OPTICAL OUT
Digital Audio
1)Connect the optical cable from the back of the receiver to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
•In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in the Digital Setup Menu. See page 76.
•Refer to your owners manual on using your amplifier.
23