CASSETTE PLAYBACK
Operate in the order shown
÷When AC power is used
(When battery power is used, switch on the 
button first, then perform operation):
1 | 2 | 3 | 1 |
ON/STANDBY |
| SPEAKER |
|
|
| VOLUME |
| ILLUMINATION |
|
| BAND | ||
| AHB PRO | /ACS | SOUND |
|
| |
|
|
|
| C D | TAPE | TUNER |
|
| PRESET | ONE TOUCH |
|
|
|
| AUX | TUNING | REC | MULTI CONTROL | ||
|
| BEAT CUT | STANDBY AHB PRO | ACS | STOP | FF |
|
|
| REW | |||
OPEN
Turn the OPEN knob to the left to open the cassette
holder.
Close the cassette holder.
OPEN
1Load a cassette tape with side A facing out.
2Press to start playback. (The power is switched on and the TAPE mode is engaged to start tape playback.)
3Adjust the volume.
÷After loading a cassette tape, simply press the TAPE 23 button. The power is switched on and the tape starts playback. (To select the playback direction, press the TAPE 23button. The change in direction can be checked with the tape direction indicator (2or 3).)
÷When the tape plays back with the reverse mode set to 
(single side play) or 
(both sides play) mode, the tape stops automatically at the end of the tape after playing one or both sides. When the reverse mode
is set to the 
(continuous play) mode, the tape continuously plays one side after the other until you stop operation.
Notes:
÷Place the unit on a level surface, otherwise the cassette holder may not open when you turn the OPEN knob.
÷Do not turn the OPEN knob until the tape mechanism has stopped moving.
÷When no tape is loaded in the deck, its tape playback direction cannot be switched over.
How to fast-wind tapes
1.Press the TAPE 23 button (to set to TAPE mode).
2.Press the 4(REW) or ¢ (FF) button.
USING WITH ANOTHER AUDIO UNIT
Operate in the order shown
÷When AC power is used
(When battery power is used, switch on the 
button first, then perform operation):
2 | 4 | 2 |
AUX
ON/STANDBY |
| SPEAKER |
|
|
| VOLUME |
| ILLUMINATION |
|
| BAND | ||
| AHB PRO | /ACS | SOUND |
|
| |
|
|
|
| C D | TAPE | TUNER |
|
| PRESET | ONE TOUCH |
|
|
|
| AUX | TUNING | REC | MULTI CONTROL | ||
|
| BEAT CUT | STANDBY AHB PRO | ACS | STOP | FF |
|
|
| REW | |||
OPEN
1Connect the audio unit, turntable, MD player, etc. to the AUX IN jack (see page 6).
2Press the AUX button. (The power is switched on and the AUX mode is engaged.)
3Start playback on the connected audio unit.
(For more details, refer to the instruction manual of the connected audio unit.)
4Adjust the volume.
(The volume level is displayed in the display window.)
17