Programming the playing order of the tracks
Using the remote control only
You can program up to 50 tracks in any desired order including the same tracks.
You can only make a program when the system is stopped.
While making a program, you cannot specify a group number to select a track.
1. Set a disc. 2. Press CD 6.
3. Press 7 to stop the disc.
4. Press PLAY MODE repeatedly to select “PROGRAM.”
The system enters the programming mode and the PRGM indicator lights up.
5. Press the number buttons to select the track to program.
•For detailed operations, see “To locate a track directly” on page 11.
Example: For track 7, press 7.
Program order number | Last programmed track |
(After 2 seconds)
Total playback time of the programmed tracks*
*Total playback time will not appear while making a program using an MP3 disc.
6. Repeat step 
to select other tracks for the program.
• To cancel the last track programmed, press CANCEL once.
7. Press CD 6.
The system plays the tracks in the same order as you have programmed them.
You can skip to a particular programmed track by pressing 4 or x during program play.
While stopped:
To confirm the programmed tracks, press 4 or x repeatedly; the tracks making up the program will successively be displayed in the programmed order.
•To add a track to the end of the program, simply press the number buttons.
To delete the tracks in the program, press CANCEL repeatedly. Each time you press the button, the last track will be erased.
To delete the entire program, press and hold CANCEL until “CLEAR!” appears on the display.
•Turning off the power will clear the program.
To exit from program mode, press PLAY MODE repeatedly until the PRGM indicator goes off.
Each time you press the button, the play mode changes as follows:
Normal play = PROGRAM = RANDOM = (back to the beginning)
Note:
(For CDs) If the total playback time of the programmed tracks exceeds 99 minutes 59 seconds, “–
Random play | English |
Using the remote control only | |
The tracks will play in no special order when you use this mode. |
|
|
|
1. Set a disc. |
|
|
|
2. Press CD 6. |
|
3. Press 7 to stop the disc.
4. Press PLAY MODE repeatedly to select “RANDOM.”
The RANDOM indicator lights up on the display.
5. Press CD 6.
The tracks are played in random order once.
To skip a track during playback, press x to skip to another track in the random sequence. The 4 button works only to go back to the beginning of the current track.
While stopped:
To exit from random mode, press PLAY MODE repeatedly until the RANDOM indicator goes off.
Each time you press the button, the play mode changes as follows:
Normal play = PROGRAM = RANDOM = (back to the beginning)
Repeating tracks
You can repeat the tracks or individual track as many times as you like.
Using the remote control only
Press REPEAT.
Each time you press the button, repeat indicator changes as follows:
For CDs:
ALL = 
= canceled = (back to the beginning)
•
ALL: Repeats all the tracks on the disc.
•
: Repeats the current track.
For MP3 discs:
ALL = 
GROUP = 
= canceled = (back to the beginning)
•
ALL: Repeats all the tracks on the disc.
•
GROUP: In normal play mode, repeats all the tracks in a group.
In program and random play modes, group repeat cannot be selected.
•
: Repeats the current track.
Repeat mode (except “
GROUP”) remains in effect even when you change the play mode.
To exit from repeat mode, press REPEAT repeatedly until the repeat indicator on the display goes off.
12
