JVC RV-NB20W manual „Listening to the radio, Tuning in to a station, „Manual Tuning, „Auto Tuning

„Listening to the radio

Number buttons
	SET
4	x
	FM/AM	PRESET TUNING
	FM MODE	FM MODE

FM/AM

x

4

You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.

„Before listening to the radio, fully extend the FM telescopic antenna.

Tuning in to a station

„1. Press FM/AM repeatedly to select either

FM or AM.

Each time you press FM/AM, the band changes between FM and AM.

The system tunes in to the last tuned station. The following information appears on the display.

–When “Manual Tuning” or “Auto Tuning” was used to tune in to the last tuned station (see below), the band frequency appears.

–When “Preset Tuning” was used to tune in to the last tuned station (see the right column), the preset number (displayed as “P-XX” on the display) and then the band frequency appear.

„Preset Tuning (possible only after presetting stations) Select the desired preset number using PRESET TUNING on the system or the number buttons on the remote control. The preset number and then the band frequency appear on the display.

PRESET TUNING button: Each time you press the button, the preset number increases.

Number buttons:	To select P-5, press 5.
	To select P-15, press +10 then 5.
	To select P-20, press +10 once then
	press 10.

Notice: To adjust the reception condition

For FM: Adjust the FM telescopic antenna’s length, angle and direction until the best reception is obtained.

(After one second)

„2. Select a station using one of the following methods.

•When you tune in to an FM stereo broadcast, the STEREO indicator lights up and you can hear stereo effect.

If an FM stereo broadcast is hard to receive or noisy, press FM MODE. The MONO indicator lights up and the sound becomes monaural, but the reception improves. When you tune in to another station, the MONO indicator goes off and stereo effect restores automatically.

Note: AM broadcasts are monaural.

„Manual Tuning

Press 4 or x repeatedly to move from frequency to frequency until you find the station you want.

OR

„Auto Tuning

Press and hold 4 or x for one second or more.

The frequency changes automatically until a station frequency is found.

OR

For AM: Change the direction of the system to obtain the best reception.

Placing the system near the window, for example, will improve AM reception.

9