English
Getting Started
This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.
Before Installation
General
•Be sure your hands are dry.
•Turn the power off to all components.
•Read the manuals supplied with the components you are going to connect.
Locations
• Install the receiver in a location that is level and protected from |
moisture. |
• The temperature around the receiver must be between |
35˚ C (23˚ and 95˚ F). |
• Make sure there is good ventilation around the receiver. Poor |
Connecting the FM and AM (MW/LW)
Antennas
FM Antenna Connections
A | ANTENNA | 75 | B | ANTENNA | 75 |
|
| FM |
|
| FM |
|
| COAXIAL |
|
| COAXIAL |
| AM | AM |
| AM | AM |
| EXT |
| EXT | ||
| LOOP |
| LOOP | ||
|
|
|
|
ventilation could cause overheating and damage the receiver. |
Handling the receiver
ANTENNA
FM Antenna
Extend the supplied FM antenna horizontally.
•Do not insert any metal object into the receiver.
•Do not disassemble the receiver or remove screws, covers, or cabinet.
•Do not expose the receiver to rain or moisture.
FM 75
COAXIAL
Checking the Supplied Accessories
Check to be sure you have all of the following items, which are supplied with the receiver.
The number in the parentheses indicates quantity of the pieces supplied.
•Remote Control (1)
•Batteries (2)
•AM (MW/LW) Loop Antenna (1)
•FM Antenna (1)
If anything is missing, contact your dealer immediately.
AM | Outside FM Antenna Cable |
LOOP
AM
EXT
A. Using the Supplied FM Antenna
The FM antenna provided can be connected to the FM 75Ω COAXIAL terminal as temporary measure.
B.Using the Standard Type Connector (Not Supplied)
A standard type connector (IEC or DIN45325) should be connected to the FM 75Ω COAXIAL terminal.
Note:
If reception is poor, connect the outside antenna.
Before attaching a 75Ω coaxial cable (the kind with a round wire going to an outside antenna), disconnect the supplied FM antenna.
3
