JVC SR-DVM70US Basic Connections, 18 EN INSTALLING YOUR NEW UNIT, connectors ^, 8AV Connection, S-VideoConnection, Component Video Connection

18 EN INSTALLING YOUR NEW UNIT

Basic Connections					8	S-Video Connection
					To connect to TV’s S-VIDEO input and AUDIO input
					connectors ^
Antenna or Cable					A Perform A – C of AAV ConnectionB in the left column.
					B Connect the unit’s [S-VIDEO OUTPUT] connector to the TV’s
						S-VIDEO input connector.
	Coaxial cable				C Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
						AUDIO input connectors.
					● If your TV is not stereo-capable, use the unit’s [AUDIO
AC outlet	Flat feeder					OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
				To [VHF/		stereo sound reproduction.
					8	Component Video Connection
		Matching transformer		UHF IN]
					To connect to TV’s component video input connectors ^
AC power cord		(not supplied)			A Perform A – C of AAV ConnectionB in the left column.
					B Connect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)]
						connectors to the TV’s component video input connectors.
					C Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
						AUDIO input connectors.
					● You can obtain high-quality component video pictures.
Back of unit					● The [COMPONENT VIDEO OUT (Y/PB/PR)] connectors do not
	To	To	To	To		output DV signals.
To
					● If your TV is not stereo-capable, use the unit’s [AUDIO
[COMPONENT	[VIDEO	[AUDIO/	[S-VIDEO	[VHF/
VIDEO OUT (Y/	OUTPUT]	VIDEO	OUTPUT]	UHF		OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
PB/PR)]		OUT]		OUT]		stereo sound reproduction.
					● By using the component video connection, you can view the
Component	BNC video	Audio/Video	S-video cable	RF cable		images in the progressive mode. For switching to the
						progressive mode, refer to AScan Mode Set (HDD & DVD Deck
video cable	cable (not	cable	(not supplied)	(supplied)
						Only)B (A pg. 76).
(not supplied)	supplied)	(supplied)
					4	Plug the end of the AC power cord into an AC outlet.
						This unit performs Plug & Play Set automatically. (A pg. 19)
					● The clock and tuner channels will automatically be set when the
						antenna is connected and when the AC power cord is first
						connected to an AC outlet. (If AAUTOB and the channel indicator
						are displayed on the front display panel before the unit is
						powered on, the clock and tuner channels are being set
			TV			automatically. Wait for the time to be displayed on the front
						display panel before turning on the unit.)
					● ALOADINGB blinks on the front display panel when the AC plug
						of the AC power cord is connected into a AC outlet and it takes
It’s essential that your unit be properly connected.						approximately 50 seconds for the unit to be turned on. This is
						not a malfunction.
ATTENTION:
Connect the AC plug only after all connections to the TV has
been completed.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO

OPERATION CAN BE PERFORMED.

1Make sure the package contains all of the accessories listed in ASPECIFICATIONSB (A pg. 88).

2Place the unit on a stable, horizontal surface.

3Connect the unit to a TV depending on the TV and cables you use.

8AV ConnectionTo connect to a TV with AV input connectors ^

ADisconnect the TV aerial cable from the TV.

BConnect the TV antenna cable to the [VHF/UHF IN] connector on the rear panel of the unit.

CConnect the [VHF/UHF OUT] connector on the rear panel of the unit and the TV’s antenna connector with the supplied RF cable.

DConnect the supplied audio/video cable between the [AUDIO/ VIDEO OUTPUT] connectors on the rear panel of the unit and the TV’s audio/video input connectors.

●if your TV is equipped with a BNC video connector, connect an optional BNC video cable between the unit’s BNC [VIDEO OUTPUT] connector and the TV’s BNC VIDEO input connector.