JVC SR-DVM70US VCR Plus+ Timer Programming, 46 EN TIMER RECORDING ON HDD/DVD DECK, FGDE, FGDE, FGDE, FGDE, NOTES:, IMPORTANT:, IMPORTANT:, Cable Box and DBS Receiver Users

46 EN TIMER RECORDING ON HDD/DVD DECK

VCR Plus+ Timer Programming

7 The PlusCode number you entered and the matching timer-

recording information are displayed on the TV screen. Check

the program data.

You can program this unit to timer record as many as 16 programs.

● To cancel this setting, press RETURN.

With the VCR Plus+ system, timer programming is greatly

simplified because each TV program has a corresponding code

IMPORTANT:

number which your unit is able to recognize.

Make sure the channel position number you wish to record is

You can use the remote control to enter the PlusCode number.

displayed; if not, see AChanging VCR Plus+ SettingB (A pg. 73)

and set the Guide Channel number correctly.

● Make sure that the unit’s built-in clock is set properly.

● Turn on the unit.

8 Press FG to select the desired recording option as required.

● Turn on the TV and select the AV mode.

Press FG to select the desired setting, then press ENTER.

● Slide the TV/CABLE/DBS/DVD switch to DVD.

● AINPUT NAMEB (A pg. 51, AModify Title NameB)

● ACATEGORYB (A pg. 52, AModify CategoryB)

CABLE/DBS

● AWEEKLY/DAILYB (A pg. 47, AWeekly/Daily RecordingB)

TV

DVD

● AREC MODEB (A pg. 34, ARecording ModeB)

9 Press FG to select AOKB, then press ENTER to access the

Program Confirmation screen.

0 – 9

10 Press DE to select AEXITB, then press ENTER to complete

timer programming.

● To program another timer, press DE to select ACONTINUEB,

then press ENTER.

PROG

● If APROGRAM OVERLAPPEDB appears on the TV screen,

ENTER

delete or modify the programs.

NOTES:

FGDE

RETURN

● There may be cases that the VCR Plus+ Timer Programming

function prolongs the stop time of the programming.

● When two successive programs are recorded on a DVD-RW disc

with the VCR Plus+ Timer Programming function, the beginning

of the second one may be left off the recording.

● If the copy limited program is received during timer-recording, the

DISPLAY

unit enters Record Pause mode. Recording starts again if it is

switched to a recordable broadcast during the time you

programmed.

IMPORTANT:

If you have moved to a different area or if a broadcasting

1 Load a recordable disc if recording to DVD.

station’s channel number has been changed, the wrong channel

number will be displayed on the VCR Plus+ program screen in

2 Press PROG to access the program top screen.

step 7. When this happens, set the correct Guide Channel

3 Press FGDE to select AVCR Plus+ PR.B, then press ENTER.

number for that station. (A pg. 73, AChanging VCR Plus+

● When APROGRAM FULL DELETE UNWANTED TIMER

SettingB)

PROGRAMSB appears on the TV screen, you need to cancel

some of the reserved programs. (A pg. 49)

Cable Box and DBS Receiver Users

4 Press the number keys to

To timer record a satellite broadcast using the VCR Plus+

enter the PlusCode number of

132

PROGRAM > VCR Plus+ PR. (1/2)

system:

a program you wish to record.

PLUS CODE NO.

A Perform AVCR Plus+ Timer ProgrammingB (A pg. 46).

1 2 3 4

OR

B Set the cable box or DBS receiver to the appropriate channel

SELECT WITH @

1

2

3

Press FGDE to select the

THEN PRESS [ENTER]

before the selected program begins.

PRESS [PROG] TO EXIT

4

5

6

desired number key on the

7

8

9

C Leave the cable box or DBS receiver’s power on.

DELETE

0

DELETE ALL

screen, then press ENTER.

PROG

ENTER

RECORD TO

DVD

Repeat to enter all required

EXIT

SELECT

CONFIRM

numbers.

●If you have made a mistake, press FGDE to select ADELETEB or ADELETE ALLB, then press ENTER and input the correct number before you press ENTER again.

5Press FG to select ARECORD TOB, then press ENTER. Press FG to select the desired recording deck, then press ENTER.

6Press FGDE to select ACONFIRMB, then press ENTER.

●If the number you entered is invalid, APLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV screen. Input a valid PlusCode number.

●If AGUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN RETRYB appears on the TV screen, set Guide Channel Numbers manually. (A pg. 73)