JVC SR-DVM70US Elapsed Recording Time And Disc Remaining Time, Indication, Recording Features, Second Audio Recording, Instant Timer Recording (ITR), REMAIN, DISPLAY, The

38 EN BASIC OPERATIONS ON HDD DECK

Recording Features				Watch Another Program While Recording On The Unit
				While recording is going on, you can watch another program on the
				TV. It does not interfere with recording.
● Turn on the unit.				1 Turn on the TV.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.				2 Select the desired channel to watch on the TV using your TV’s
● Press DV/HDD/DVD on the unit repeatedly or HDD on the				remote control.
remote so that the HDD lamp lights up on the unit.				Elapsed Recording Time And Disc Remaining Time
	HDD lamp	DV/HDD/DVD		Indication
				During recording, press DISPLAY on the remote control or the unit
				repeatedly until the desired indication appears on the front display
				panel.
				● Each time you press DISPLAY, the time indication changes as
				follows:
DISPLAY	CH +/-		R	Elapsed recording time N Disc remaining time N Clock N (Back
				to the beginning)
		CABLE/DBS		● You can also check the disc remaining time by pressing REMAIN
		TV	DVD
	TV / VIDEO			while the unit is stopped or recording is in progress. The list of
	HDD			disc remaining times for all recording modes appears on the TV
				screen.

REMAIN

CH +/-

DISPLAY

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set A2ND AUDIO RECORDB to AONB. (A pg. 72)

NOTES:

When the channel is changed on the unit;

●The AMONOB indicator appears on the screen for about 5 seconds if the program is a monaural broadcast.

●The ASTEREOB indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.

●Both ASTEREOB and ASAPB indicators appear when a stereo program is accompanied by SAP sound.

●Both AMONOB and ASAPB indicators appear when the main audio on the monaural broadcast is accompanied by SAP sound.

Instant Timer Recording (ITR)

This easy method lets you record for 30 minutes to 6 hours (selectable in 30-minutes interval), and shuts the unit off after recording is finished.

1Press R on the unit to start recording.

2Press R again to engage the ITR mode.

●On the front display panel, A0:30B appears.

3If you want to record for more than 30 minutes, press R to extend the time. Each press extends recording time by 30 minutes.

NOTES:

●You can only perform ITR using the R button on the unit.

●When the recording capacity becomes full during timer recording or Instant Timer Recording, the unit is automatically shut off.